16-bit Microprocessors

V30
Manufacturer NEC
Category Complete 16 bit parallel central processing unit
Introduction
History

 
Technology

manufactured in CMOS technology; the V30 is pin-compatible with the 8086 microprocessor but operates up to 40 % faster at the same clock frequency; instruction set (101 instructions) is a superset of the standard 8086 instruction set; it uses a 16-bit internal bus and an 16-bit external bus; complete software compatibility with V20 to V50 microprocessors; available in following packages: DIP, PLCC QFP; 8080 emulation mode; low-power consumption; low-power standby mode; single power supply

Diagrams		  
Block diagram

(487 kB)
Max. Clock Frequency

10 MHz


Examples





Package

Comment		  
NEC
D 70116 D-8		 NEC
D 70116 C-8		 NEC
D 70116 C-10		 Sony
CXQ 70116D-8		 Zilog
Z 70116-5 DS
40 pin CERDIP 40 pin DIP 40 pin DIP 40 pin CERDIP 40 pin CERDIP
- - - - -

Manufactured
devices		  
Type Clock
[MHz]		 Package Pins
uPD 70116 C-5 5 DIP 40
uPD 70116 C-8 8 DIP 40
uPD 70116 C-10 10 DIP 40
uPD 70116 D-5 5 CERDIP 40
uPD 70116 D-8 8 CERDIP 40
uPD 70116 D-10 10 CERDIP 40
uPD 70116 G-5 5 Plastic Flat Pack 52
uPD 70116 G-5 5 Plastic Flat Pack 52
uPD 70116 GC-5 5 Plastic Flat Pack 52
uPD 70116 GC-8 8 Plastic Flat Pack 52
uPD 70116 L-5 5 PLCC 44
uPD 70116 L-8 8 PLCC 44

 

Second source -
Peripherals uPD 71011: Clock Pulse Generator for V20/V30 (using 50 % Duty Cycle)
uPD 71051: Programmable Coomunication Interface
uPD 71054: Programable Timers / Counters
uPD 71055: Programable Parallel Interface
uPD 71059: Programmable Interrupt Controller
uPD 71071: DMA Controller with programmable 8 or 16 bit Buswidth
uPD 71082: Octal Latch
uPD 71083: Octal Latch
uPD 71084: Clock Pulse Generator (33 % Duty Cycle)
uPD 71086: Bus Transceiver, 8 bit
uPD 71087: Bus Transceiver, 8 bit
uPD 71088: System Bus Controller